Need photo |
Model
Identification |
Color |
Red |
Frame serial # |
F6F-30402 - 42370 |
Engine serial # |
F6E24447 - 36440 found on LH side crankcase below air
intake duct. |
Cylinder Mark |
124CC found on LH side |
Engine |
Engine Type |
2 stroke, single cylinder, rotary disc valve, air
cooled. |
Displacement |
124cc |
Bore X Stroke |
52.0 X 58.8 mm |
Compression Ratio |
7.2:1 |
Maximum HP |
14.5 at 7500 rpm |
Maximum torque |
1.43 kg-m at 7000 rpm |
Carburetor |
Mikuni VM24SC |
Lubrication System |
Superlube (port injection) |
Transmission |
Ignition System |
Flywheel magneto |
Clutch Type |
Wet, multi-disc, Manual |
Ignition Advance |
Fixed |
Transmission |
5-speed,constant mesh, return shift |
Crankshaft Rotation |
Counterclockwise from ignition (LH) side |
Shift Pattern |
1-N-2-3-4-5 bottom up (w/neutral finder) |
Cylinder Material |
Ferrous |
Gear ratios |
1st |
2.67 (32/12) |
Fuel |
Min 91 Research/87 average oct, unleaded OK |
|
2nd |
1.75 (28/16) |
Oil |
2-stroke oil for air cooled engines |
|
3rd |
1.20 (24/20) |
Tuning
Specifications |
|
4th |
0.91 (21/23) |
Engine |
|
5th |
0.72 (18/25) |
Cylinder Head Torque Nuts |
Cross-tighten: 2.5 kg-m |
Primary Ratio |
3.13 (75/24) |
Final Ratio |
3.93 (55/14) |
Compression Pressure |
8.0 kg/cm² STD 5.6 kg/cm² service limit |
Overall Ratio |
8.84 top gear |
Spark Plug |
NGK B8HCS or B8HS 0.6 - 0.7 mm gap |
Chassis |
Ignition Timing |
23° BTDC (2.94mm) - Remove cap, flywheel mark aligns
with pointer on cover at 8 o'clock position |
Wheelbase |
1315 mm |
Point Gap |
0.30 - 0.40 mm |
Ground Clearance |
245 mm |
Air Screw |
1¾ turns out |
Dry Weight |
105 kg |
Idle Speed |
1250 ± 50 RPM |
Fuel Tank Capacity |
9.7 liters |
Transmission Oil |
SE Class SAE 10W30, 10W40, 20W40, 20W50 |
Tire Size |
Front |
3.00-18 4PR Tube-Type |
- Capacity |
0.7 liter |
Rear |
3.25-18 4PR Tube-Type |
- Level |
Motorcycle vertical, wait 5 min, between lines on
dipstick, fully screwed in. |
Brake Type |
Front |
Mechanical Drum (Leading/Trailing) |
Chassis |
Rear |
Mechanical Drum (Leading/Trailing) |
Fork Oil |
SAE 10W |
Brake Size |
Front |
130 X 28 mm |
- Capacity |
152 cc dry |
Rear |
130 X 28 mm |
- Level |
495 ± 4 mm (Fork extended, spring installed) |
Suspension Stroke |
Front |
145 mm |
Tire Pressure |
Front |
1.60 kg/cm² cold |
Rear |
90 mm |
Rear |
2.00 kg/cm² cold (normal) |
|
Drive Chain Slack |
15 - 20 mm (on side stand, tightest point, STD) |