Zedder Enterprises Zedder Enterprises

76 KD 175-A1

Kawasaki Part Cross Reference Software contains information for this bike.
Need photo Model Identification
Color Quick Silver
Frame serial # KD175A-000001 - 003100
Engine serial # KD175AE000001 - 003100, found on LH side below air intake duct.
Cylinder Mark 174CC found on LH side
Engine Type 2 stroke, single cylinder, rotary disc valve, air cooled.
Displacement 174cc
Bore X Stroke 61.5 X 58.8 mm
Compression Ratio 7.0:1
Maximum HP 16 at 7000 rpm
Maximum torque 1.8 kg-m at 5000 rpm
Carburetor Mikuni VM26SS
Lubrication System Superlube (port injection)
Ignition System Magneto CDI (Flywheel)
Transmission Ignition Advance Electronic
Clutch Type Wet, multi-disc, Manual Crankshaft Rotation Counterclockwise from ignition (LH) side
Transmission 5-speed,constant mesh, return shift Cylinder Material Aluminum alloy with ferrous sleeve
Shift Pattern 1-N-2-3-4-5 bottom up Fuel Min 91 Research/87 average oct, unleaded OK
Gear ratios 1st 2.67 (32/12) Oil 2-stroke oil for air cooled engines
  2nd 1.75 (28/16) Tuning Specifications
  3rd 1.20 (24/20) Engine
  4th 0.95 (19/20) Cylinder Head Torque Nuts cross tighten 2.2 kg/m
  5th 0.77 (17/22) Compression Pressure 8.5 kg/cm² STD 6.0 kg/cm² service limit
Primary Ratio 3.13 (75/24) Spark Plug NGK B9HS 0.6 - 0.7 mm gap
Final Ratio 3.43 (48/14) Ignition Timing 22° BTDC (2.69mm) at 4000 rpm - Flywheel mark aligns with crankcase mark at 12 o'clock position
Overall Ratio (top gear) 8.28 Air Screw 1¼ turns out
Chassis Idle Speed Lowest stable RPM (usually 1250 ± 50 RPM)
Wheelbase 1370 mm Transmission Oil SE Class SAE 10W30 or 10W40
Seat Height 813 mm - Capacity 0.7 liter
Ground Clearance 235 mm - Level Motorcycle vertical, wait 5 min, between lines on dipstick, screwed in ½ turn.
Dry Weight 97 kg Chassis
Fuel Tank Capacity 6.7 liters Fork Oil SAE 10W
Tire Size Front 2.75-21 4PR Tube-Type - Capacity 150 cc dry
Rear 3.50-18 4PR Tube-Type - Level 416 ± 4 mm (Top of cap bolt, fork extended, spring installed)
Brake Type Front Mechanical Drum (Leading/Trailing) Tire Pressure Front 1.25 kg/cm² cold
Rear Mechanical Drum (Leading/Trailing) Rear 1.25 kg/cm² cold (normal 0 - 97.5 kg)
Brake Size Front 120 X 28 mm Rear 1.50 kg/cm² cold (heavy over 97.5 kg)
Rear 130 X 28 mm Drive Chain Slack About 20 - 30 mm (on side stand, tightest point, STD)
Suspension Stroke Front 150 mm  
Rear 90 mm

Return to Front Page

Zedder Enterprises

This site offers secure, encrypted ordering for your protection. Click here to find out moreBuilt using ecBuilder.