Zedder Enterprises Zedder Enterprises

84 KDX200-A2

Kawasaki Part Cross Reference Software contains information for this bike.
Need photo Model Identification
Color 1- Lime Green 2- Sunbeam Red
VIN Range JKADXNA1eEA003001~007400
Engine serial # DX200AE003001~008400, found on RH side crankcase, below cylinder base.
Cylinder Mark 0.198l found on RH side
Engine Type 2 stroke, single cylinder, piston reed valve, air cooled.
Displacement 198cc
Bore X Stroke 66.0 X 58.0 mm
Compression Ratio 7.7:1
Maximum HP N/A
Maximum torque N/A
Carburetor Mikuni VM32SS
Lubrication System Premix gasoline & oil
Ignition System Magneto CDI (Flywheel)
Transmission Ignition Advance Electronic
Clutch Type Wet, multi-disc, Manual Crankshaft Rotation Counterclockwise from ignition (LH) side
Transmission 6-speed,constant mesh, return shift Cylinder Material Aluminum alloy with electro fusion bore
Shift Pattern (bottom up) 1-N-2-3-4-5-6 Fuel Min 95 Research/90 average oct, mixed 30:1 gas:oil
Gear ratios 1st 2.77 (36/13) Oil 2-stroke racing oil for air cooled engines
2nd 2.00 (28/14) Tuning Specifications
3rd 1.53 (23/15) Engine
4th 1.24 (21/17) Cylinder Head Torque Head Nuts Cross-tighten 2.5 kg/m
5th 1.04 (25/24) Cylinder Base Nuts Cross-tighten 2.5 kg/m
6th 0.87 (20/13) Compression Pressure 11.0 - 13.0 kg/cm² STD 8.4 kg/cm² service limit.
Primary Ratio 2.86 (63/22) Spark Plug NGK B9ES (USA) BR9ES (Canada) 0.7 - 0.8 mm gap
Final Ratio 3.69 (48/13) Ignition Timing 21° BTDC (2.34mm) at 6000 rpm - Flywheel mark aligns with crankcase mark at 9 o'clock position
Overall Ratio (top gear) 9.19 Idle Speed Engine stops at closed throttle or lowest stable rpm
Chassis Transmission Oil SE Class SAE 10W30 or 10W40
Wheelbase 1430 mm - Capacity 0.60 liter
Seat Height 935 mm - Level Motorcycle vertical, wait 5 min, middle of window.
Ground Clearance 340 mm Chassis
Dry Weight 95.5 kg Fork Oil SAE 10W
Curb Weight 105 kg - Capacity 441 - 449 cc dry
Fuel Tank Capacity 12 liters - Level 165 ± 2 mm (Fork compressed, spring removed)
Tire Size Front 3.00-21 4PR Tube-Type Fork Air Pressure 0.00 kg/cm² max 2.5 kg/cm²
Rear 4.00-18 4PR Tube-Type Tire Pressure Front 1.0 kg/cm² Change for course and rider preference
Brake Type Front Mechanical Drum (Leading/Trailing) Rear 1.0 kg/cm² Change for course and rider preference
Rear Mechanical Drum (Leading/Trailing) Drive Chain Slack 50 - 60 mm (on side stand, lift top chain run, measure from bottom of lifted chain to swing arm just behind rubber protector, STD) Add 5 mm for muddy condition.
Brake Size Front 120 X 35 mm
Rear 110 X 30 mm
Suspension Stroke Front 260 mm
Rear 280 mm

Return to Front Page

Zedder Enterprises

This site offers secure, encrypted ordering for your protection. Click here to find out moreBuilt using ecBuilder.